3D Scanners - Revision history

Nsullivan: /* Certification */

2026-08-24T17:58:14Z

Certification

2025-08-13T17:49:24Z

Troubleshooting

2025-08-13T16:27:16Z

Troubleshooting

2025-08-12T20:56:52Z

Troubleshooting

2025-08-12T20:51:16Z

Troubleshooting

2025-08-12T20:50:33Z

Troubleshooting

2025-08-12T20:43:12Z

Troubleshooting

2025-07-15T22:21:07Z

Certification

2024-11-19T21:01:00Z

2024-08-22T21:51:41Z

Certification

@@ Line 117: / Line 117: @@
 The scanners are very fragile.  Take care to prevent damage by dropping.  Never pull on the scanner cords as the connectors could be easily damaged. Keep your fingers off of the optical lens as the grease from your fingers can cause issues.
-==Certification==
+==Canvas Certification==
 Complete <strong>The Vault - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
-[https://georgefox.instructure.com/enroll/R6RF69 Maker Hub Canvas Course]
+[https://georgefox.instructure.com/enroll/JFA784 Maker Hub Canvas Course]
 ==Troubleshooting==

@@ Line 124: / Line 124: @@
 ==Troubleshooting==
-Artec Spider – Troubleshooting Checklist
+Artec Spider
 #Connection & Power
@@ Line 143: / Line 143: @@
 ##Reduce object or turntable movement during scanning.
-Artec Eva – Troubleshooting Checklist
+Artec Eva
 #Connection & Power

@@ Line 137: / Line 137: @@
 ##Perform a calibration using the supplied calibration panel if scans show distortion or misalignment.
 #Scanning Conditions
 ##Keep the scanner 20–30 cm from the object for optimal resolution.
 ##Maintain smooth, steady movement—avoid jerky panning.
@@ Line 156: / Line 155: @@
 #Scanning Conditions
 ##Maintain 40–100 cm distance from the object.
-##Ensure good, even lighting—avoid strong shadows or direct sunlight.
+##Ensure good, even lighting; avoid strong shadows or direct sunlight.
 #Tracking Stability
-##Scan with a background that has texture—plain walls or empty tables can cause tracking loss.
+##Scan with a background that has texture; plain walls or empty tables can cause tracking loss.
 ##Use larger sweeps to capture big surfaces and avoid sudden movements.
 #Performance & Data Handling

@@ Line 125: / Line 125: @@
 Artec Spider – Troubleshooting Checklist
 #Connection & Power
@@ Line 144: / Line 143: @@
 ##Add tracking markers or place the object on a textured background if tracking is lost.
 ##Reduce object or turntable movement during scanning.
 ==Maintenance==

@@ Line 128: / Line 128: @@
 #Connection & Power
 ##Check USB cable is securely connected to both scanner and computer.
 ##Confirm the blue LED on the scanner is lit.
 ##Try a different USB port (preferably USB 3.0) and avoid hubs.
 #Software Setup
 ##Ensure Artec Studio is updated to the latest version.
 ##Select the Spider in the device list before starting a scan.
 #Calibration & Warm-Up
 ##Let the Spider warm up for 10–15 minutes before scanning—its structured light projector is sensitive to temperature.
 ##Perform a calibration using the supplied calibration panel if scans show distortion or misalignment.
 #Scanning Conditions
 ##Ensure the object is matte—apply 3D scanning spray if it’s shiny or transparent.
 ##Keep the scanner 20–30 cm from the object for optimal resolution.
 ##Maintain smooth, steady movement—avoid jerky panning.
 #Tracking Issues
 ##Add tracking markers or place the object on a textured background if tracking is lost.
 ##Reduce object or turntable movement during scanning.

← Older revision		Revision as of 20:43, 12 August 2025
Line 123:		Line 123:

	==Troubleshooting==		==Troubleshooting==
		+
		+	Artec Spider – Troubleshooting Checklist
		+	(High-precision, small-object scanner)
		+
		+	#Connection & Power
		+
		+	*Check USB cable is securely connected to both scanner and computer.
		+
		+	*Confirm the blue LED on the scanner is lit.
		+
		+	*Try a different USB port (preferably USB 3.0) and avoid hubs.
		+
		+	#Software Setup
		+
		+	*Ensure Artec Studio is updated to the latest version.
		+
		+	*Select the Spider in the device list before starting a scan.
		+
		+	#Calibration & Warm-Up
		+
		+	*Let the Spider warm up for 10–15 minutes before scanning—its structured light projector is sensitive to temperature.
		+
		+	*Perform a calibration using the supplied calibration panel if scans show distortion or misalignment.
		+
		+	#Scanning Conditions
		+
		+	*Ensure the object is matte—apply 3D scanning spray if it’s shiny or transparent.
		+
		+	*Keep the scanner 20–30 cm from the object for optimal resolution.
		+
		+	*Maintain smooth, steady movement—avoid jerky panning.
		+
		+	#Tracking Issues
		+
		+	*Add tracking markers or place the object on a textured background if tracking is lost.
		+
		+	*Reduce object or turntable movement during scanning.

	==Maintenance==		==Maintenance==

@@ Line 17: / Line 17: @@
   |Has description=
   |Has certification=https://georgefox.instructure.com/courses/1308
-  |Has ace=Klayton Rhoads;krhoads16@georgefox.edu
+  |Has ace=Needed;Makerhub@georgefox.edu
 }}

@@ Line 120: / Line 120: @@
 Complete <strong>The Vault - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
-[https://georgefox.instructure.com/enroll/G7CTPX Maker Hub Canvas Course]
+[https://georgefox.instructure.com/enroll/GH36RT Maker Hub Canvas Course]
 ==Troubleshooting==