CNC Router - Revision history

Edejong22: /* Toolpaths */

2025-08-12T16:55:43Z

Toolpaths

Edejong22: /* Toolpaths */

2025-08-12T16:55:22Z

Toolpaths

Edejong22: /* Certification */

2025-07-15T22:36:09Z

Certification

Nsullivan at 21:03, 19 November 2024

2024-11-19T21:03:15Z

Nsullivan: /* Certification */

2024-08-22T21:53:52Z

Certification

Nsullivan: /* Certification */

2023-08-26T07:23:38Z

Certification

Nsullivan at 19:16, 23 January 2023

2023-01-23T19:16:15Z

Kaylam20: /* Safety First */

2022-06-24T18:35:43Z

Safety First

Kaylam20: /* Safety First */

2022-06-24T18:35:24Z

Safety First

Kaylam20: /* Safety First */

2022-06-24T18:35:15Z

Safety First

@@ Line 137: / Line 137: @@
 Pocket Toolpath
-A pocket toolpath is used to remove material within a closed boundary to a specified depth, creating a flat-bottomed recess in the workpiece. In VCarve Pro, you define the vector shape of the pocket, the cut depth, and the tool or tools that will perform the operation. The software then calculates a series of tool passes that progressively clear material inside the shape, leaving smooth, level surfaces. You can choose different cutting strategies—such as raster, offset, or spiral patterns—to balance speed, tool wear, and surface finish. Pocket toolpaths are commonly used for creating recesses for inlays, engraving areas, or making spaces for hardware components. On a Laguna CNC router, the precision of the pocket toolpath ensures consistent depth and clean edges, provided the correct feeds, speeds, and stepovers are used.
+*A pocket toolpath is used to remove material within a closed boundary to a specified depth, creating a flat-bottomed recess in the workpiece. In VCarve Pro, you define the vector shape of the pocket, the cut depth, and the tool or tools that will perform the operation. The software then calculates a series of tool passes that progressively clear material inside the shape, leaving smooth, level surfaces. You can choose different cutting strategies—such as raster, offset, or spiral patterns—to balance speed, tool wear, and surface finish. Pocket toolpaths are commonly used for creating recesses for inlays, engraving areas, or making spaces for hardware components. On a Laguna CNC router, the precision of the pocket toolpath ensures consistent depth and clean edges, provided the correct feeds, speeds, and stepovers are used.
 Profile Toolpath
-A profile toolpath is used to cut along the outline of a selected vector, either on the inside, outside, or directly on the line. In VCarve Pro, you can control cut depth, direction (climb or conventional), and the number of passes, as well as add ramping moves for smoother entry. An outside profile cut is typically used to cut out parts to their final size, ensuring the finished dimension is accurate. An inside profile cut is used for holes or slots where you want the finished size inside the vector boundary. You can also apply tabs—small uncut sections—to hold parts in place during cutting, preventing them from moving once free from the stock. On a Laguna CNC router, a well-set profile toolpath allows for clean edges and precise part outlines, making it one of the most common operations in CNC routing.
+*A profile toolpath is used to cut along the outline of a selected vector, either on the inside, outside, or directly on the line. In VCarve Pro, you can control cut depth, direction (climb or conventional), and the number of passes, as well as add ramping moves for smoother entry. An outside profile cut is typically used to cut out parts to their final size, ensuring the finished dimension is accurate. An inside profile cut is used for holes or slots where you want the finished size inside the vector boundary. You can also apply tabs—small uncut sections—to hold parts in place during cutting, preventing them from moving once free from the stock. On a Laguna CNC router, a well-set profile toolpath allows for clean edges and precise part outlines, making it one of the most common operations in CNC routing.
 Other Toolpath

@@ Line 134: / Line 134: @@
 # Passes: Adjust the number of passes such that the pass depth is less than the diameter of the end mill you are using.
 # Ramp Plunge: This option plunges the end-mill on a ramp instead of going straight into the material. Generally it is wise to use this feature because it reduces the forces on the end-mill.
 Pocket Toolpath
 Profile Toolpath
 Other Toolpath

@@ Line 196: / Line 196: @@
 Complete the <strong>Wood Shop - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
-[https://georgefox.instructure.com/enroll/GH36RT Maker Hub Canvas Course]
+[https://georgefox.instructure.com/enroll/R6RF69 Maker Hub Canvas Course]
 ==Troubleshooting==

@@ Line 18: / Line 18: @@
   |Has description=
   |Has certification=https://georgefox.instructure.com/courses/1215
-  |Has ace=Luke Roderick;lroderick20@georgefox.edu
+  |Has ace=Needed;Makerhub@georgefox.edu
 }}
 [[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|140px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]

@@ Line 196: / Line 196: @@
 Complete the <strong>Wood Shop - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
-[https://georgefox.instructure.com/enroll/G7CTPX Maker Hub Canvas Course]
+[https://georgefox.instructure.com/enroll/GH36RT Maker Hub Canvas Course]
 ==Troubleshooting==

@@ Line 194: / Line 194: @@
 ==Certification==
-[https://georgefox.instructure.com/courses/1215 Canvas Quiz]
+[https://georgefox.instructure.com/enroll/G7CTPX Maker Hub Canvas Course]
 ==Troubleshooting==

@@ Line 4: / Line 4: @@
   |Is used in domain=Wood
   |Has name={{PAGENAME}}
   |Has serial number= 16124390
   |Has group=Woodworking
   |Has icon=File:CNC_router_icon.png
@@ Line 13: / Line 18: @@
   |Has description=
   |Has certification=https://georgefox.instructure.com/courses/1215
   |Has ace=Luke Roderick;lroderick20@georgefox.edu
 }}

@@ Line 36: / Line 36: @@
 * The tooling is very sharp and spins at over 18,000 RPM. Keep your body parts away from the cutter and spindle. You need fingers for the ring you will get by spring.
 * Stay behind the yellow/black safety line when operating the router. The router is very large and will not stop if you get in its way.
-* Materials need to be securely fastened to the table by vacuum or mechanical means.
+* Materials need to be securely fastened to the table by vacuum or mechanical means. This includes material that could be made loose during the cutting process. Use tabs to secure such material.
 * Never attempt to cut a hole the same diameter as the cuter with a down cut force cutter.  This will compress the chips and can create a fire due to the air draw of the vacuum table.
 * Always wear ear protection when operating the CNC router.