Tools# QUERY4075e7be8fe814a6904e98dd8f8eb938
Hand powered tool with different tips, that is mostly used for craft purposes, such as carving, etching and sanding small items.
A bubble level has many uses including, but not limited to verify plumb and level. Some of the many uses include picture and sign hanging, post installation, machine leveling.

This is a battery charger for lead acid batteries.

A really bright light for illuminating an area.

An extendable mirror for viewing hard-to-see places.
A wire brush designed to remove corrosion and contaminants from the terminals of a car battery.

A holesaw is used in a drill to cut perfectly round holes in a wide variety of materials
A power tool that emits a stream of hot air, usually at temperatures between 100 °C and 550 °C (200-1000 °F), with some hotter models running around 760 °C (1400 °F), which can be held by hand
This is for reducing the air pressure of a compressed air bottle.
This is connected to a helium bottle and allows the user to fill a helium balloon.

This is a hydraulic jack and can be used for lifting heavy objects. Never put anything under heavy objects that you wouldn't want crushed.
A device which uses a fan to collect and filter harmful fumes. Always use one of these when soldering for your protection.
Handheld device that can display temperature readout on it after scanning portions of an object or area with the built-in laser. They tend to be inaccurate when measuring shiny objects, putting some non-reflective tape on the object can help give a better measurement.

A thermocouple for measuring temperatures between -50C and 1300C.
This is an instrument that is used to measure revolutions per minute or RPM. This is a non contact device that uses light and a reflector. This device can be used to measure the RPM of a motor shaft.

This instrument can be clamped over a wire to measure the current flowing through it.
AVR training board used in ENGE320. Coupled with the Atmel 328P Xplained. Shield includes a 7-Segment display, some buttons, a switch, RGB LED's, and a piezo buzzer.
ARM training board used in ENGE320. Coupled with the Arduino Zero. Shield includes an AMOLED display, joystick, DPAD, RGB LED's, accelerometer, SD Card slot, and a piezo buzzer.

FPGA training board used in ENGE220. Has a bank of switches, buttons, LCD display, 7-Segment display, piezo buzzer, stepper motor driver, and more!
Used to monitor and debug various digital signals and communication busses.

An extra set of hands to hold things while soldering.
A USB oscilloscope, logic analyzer, and multi-function instrument that allows users to measure, visualize, generate, record, and control mixed-signal circuits of all kinds.

A powerful digital system design platform built around a Xilinx Spartan-3E FPGA.



A hand tool which heats metal solder in order to join two components. Soldering is most commonly used to join electrical components in a circuit. There are two soldering kits for use at the electronics station in the center of the Maker Hub, and there are also several available for checkout in the Tool Room. For your safety, please always place the soldering iron in its holder when not in use. Always use a fume extractor to protect yourself from harmful fumes. Soldering kits also come with a tackle box containing useful tools for soldering, such as wire crimpers. Please make sure all contents of this box are returned when you finish using a soldering kit.

The impact Driver is specially designed for tightening and loosening various hex-head bolts, nuts, and lag screws. It employs both rotational force (torque) and short-burst concussive blows (impacts) to deliver an unparalleled amount of power.

You can use a cordless drill driver to drill or bore holes, drive screws, assemble furniture, and woodworking.
For Going Pro. Takes Video and Pictures. Can be used with the GoPro Accessories in the GoPro accessory kit.
An instrument for conducting measurements on a circuit. They can measure DC voltage, AC RMS Voltage, current, resistance, and more. Multimeters are essential tools for testing or troubleshooting a circuit.

Powerful cutting tool to cut through thick metal pieces.
A torque wrench is a tool used to apply a specific torque to a fastener such as a nut, bolt, or lag screw.
Instrument used to gain a precise measurement of a material or structure.
A tool which holds tubes of caulk and is used to seal up cracks and gaps in various structures.
a handheld power saw that features a blade designed to be easily swapped out for different tasks and moves back and forth to quickly cut through a variety of materials.
A tool used to stabilize a phone so that it can be rotated around an axis
A video camera which is designed to record or stream to a computer or computer network.
A socket wrench is a type of spanner that uses a closed socket format, rather than a typical open wrench/spanner to turn a fastener, typically in the form of a nut or bolt. This set comes with an assortment of socket sizes.
An impact driver is a tool that is used to drive screws and bolts. It is designed to deliver high torque output with minimal exertion by the user. Impact drivers are ideal for driving large screws and bolts more efficiently than the average compact drill. This set includes various bits that will fit into an impact driver.
A current clamp is a device that measures electric current flowing through a wire, cable, busbar, or other conductor.

A multimeter is a measuring instrument that can measure multiple electrical properties. A typical multimeter can measure voltage, resistance, and current, in which case can be used as a voltmeter, ammeter, and ohmmeter. Some feature the measurement of additional properties such as temperature and capacitance.
Arduino Uno is an open-source microcontroller board based on the Microchip ATmega328P microcontroller. It is a Single circuit board that can be programmed and comprises of 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header and a reset button.
A desktop device to provide DC power to a circuit at a specified voltage. Our BK Precision power supplies have three outputs: two output 0-24 V variable voltage with a max current of .5 A, and one outputs a fixed 5 V with a max current of 4 A. The electronics station in the center of the Maker Hub has several power supplies available for use. If all of these are in use, or if you would like to use a power supply elsewhere in the Hub, you can check one out from the Tool Room.

An instrument for measuring and graphically displaying varying signal voltages. They can can plot a changing electrical signal over time, and then analyze it for properties including frequency, wavelength, and amplitude. Our oscilloscopes have four channels, meaning they can display four signals at once.
A device which can produce a basic electrical signal. Our function generators can produce sine waves, square waves, and triangle waves at frequencies between 1 Hz and 10 MHz. They can also be configured to produce a "sweep signal" - a signal with a linearly varying frequency.
This is an electronic instrument for detecting and measuring ionizing radiation with the use of a Geiger–Müller tube

Chronos high-speed cameras are known for their ability to capture video at extremely high frame rates, allowing for slow-motion effects and detailed analysis of fast-moving events.

Probes that can be used to analyze the logic states.
