Changes

  |Has description=

  |Has description=

  |Has certification=https://georgefox.instructure.com/courses/1268

  |Has certification=https://georgefox.instructure.com/courses/1268

  |Has ace=Gail Dowler;gdowler@georgefox.edu

  |Has ace=Sara Wytsma;swytsma23@georgefox.edu

}}

}}

[[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|140px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]

[[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|140px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]

====Terminology====

====Terminology====

* Needle -  

*Needle - The pointed metal component that pierces the fabric and carries thread through it to form stitches.

* Spool -

*Spool - The cylindrical holder that contains the thread, supplying it to the machine during sewing.

==Training==

==Training==

====General Procedure====

====General Procedure====

Insert general procedure here.

The Janome MyLock 634D is a multi-thread serger designed for overlocking, trimming, and finishing fabric edges in one step. To operate, start by threading the machine in the correct sequence (upper looper, lower looper, right needle, left needle), following the color-coded guides. Select the desired stitch type and adjust tension dials, stitch length, and differential feed settings based on fabric type. Place fabric under the presser foot, lower the foot lever, and gently guide the material while the machine trims and serges the edge. For best results, maintain a consistent feed and avoid pulling the fabric. Always test on a scrap piece before sewing the final garment.

==Certification==

==Certification==

Complete <strong>The Hub - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.

Complete <strong>The Hub - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.

[https://georgefox.instructure.com/enroll/GH36RT Maker Hub Canvas Course]

[https://georgefox.instructure.com/enroll/R6RF69 Maker Hub Canvas Course]

==Troubleshooting==

==Troubleshooting==