2,517
edits
Changes
Jump to navigation
Jump to search
Line 51:
Line 51: − * [http://www.americanmachinetools.com/how_to_use_a_hand_brake.htm How to Use a Hand Brake] − * [https://www.youtube.com/watch?v=prZtjSlyLFo Box and Pan Brake Video] + + + + + + + + + + + + + Line 73:
Line 84: − + − ex. − If a 90degree input produces a 92degree bend select 'under bend 2degrees' − + + + Line 86:
Line 97: + + + + + + − Line 102:
Line 118: − + −
→Documentation
Here is an example of this piece of equipment being used.
Here is an example of this piece of equipment being used.
{{#evu:https://www.youtube.com/watch?v=0cCH_b2FtTE}}
{{#evu:https://www.youtube.com/watch?v=prZtjSlyLFo}}
==Documentation==
====Terminology====
* Punch - upper tool that is attached to the ram (the moving part of the press brake)
* Die - lower tool that sits on the bed of the press brake
[http://www.americanmachinetools.com/how_to_use_a_hand_brake.htm How to Use a Hand Brake]
[[Media:Quick Start Operation Manual - Titan 25T - DRAFT.pdf|CNC Press Brake User Manual]]
==Training==
==Training==
==Over/Under bending==
==Over/Under bending==
If you set the machine to a 90degree bend and it executes a 92 degree bend, this is called an overbend. The machine is able to account for this. If you happen to have an over/under bend select the OPPOSITE bend and input the amount of the over/under bend.
If you set the machine to a 90 degree bend and it executes a 92 degree bend, this is called an overbend. The machine is able to account for this. If you happen to have an over/under bend select the OPPOSITE bend and input the amount of the over/under bend.
If a 90degree input produces a 88degree bend select 'over bend 2degrees'
If a 90 degree input produces a 92 degree bend select 'under bend 2 degrees'
If a 90 degree input produces a 88 degree bend select 'over bend 2 degrees'
====Demonstration====
====Demonstration====
====General Procedure====
====General Procedure====
After the bend is properly set up in the computer, press the two green buttons simultaneously. This should lower the punch to the safety clearance zone.
Once in this zone insert your material into the machine where you want the bend to be and hold with two hands.
Press the foot pedal twice and be careful not to let the metal hit you while its bending.
=== Bending Steps ===
=== Bending Steps ===
==Reset the Space==
==Reset the Space==
Complete the <strong>Machine Shop - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
Complete the <strong>Machine Shop - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
[https://georgefox.instructure.com/enroll/GH36RT Maker Hub Canvas Course]
[https://georgefox.instructure.com/enroll/R6RF69 Maker Hub Canvas Course]
==Maintenance==
==Maintenance==