79
edits
Changes
Jump to navigation
Jump to search
Line 123:
Line 123: − − ==Troubleshooting== − If for whatever reason the machine is being difficult, you can look in the upper left corner and the machine will most likely tell you what's wrong. Line 148:
Line 145: + +
no edit summary
# Finally, right click on the desired file name in the job queue and hit print.
# Finally, right click on the desired file name in the job queue and hit print.
# After the cut is finished turn off the machine with the secondary power button but make sure to leave the main power switch on to prevent damage and wait 20 minutes before interacting with the graphic.
# After the cut is finished turn off the machine with the secondary power button but make sure to leave the main power switch on to prevent damage and wait 20 minutes before interacting with the graphic.
==Troubleshooting==
==Troubleshooting==
*If for whatever reason the machine is being difficult, you can look in the upper left corner and the machine will most likely tell you what's wrong.
* [[File:Vinyl1.png|none|thumb|866x866px]]
* The most common issue is the printer beeping when trying to load a piece of material. To fix this, make sure the pinch roller is positioned above a grit roller by finding a new piece of vinyl or rotating/cutting down the current piece.
* The most common issue is the printer beeping when trying to load a piece of material. To fix this, make sure the pinch roller is positioned above a grit roller by finding a new piece of vinyl or rotating/cutting down the current piece.
* If there are globs, spots, or streaks of ink occurring during the printing process then it is time to manually clean the print head (see maintenance).
* If there are globs, spots, or streaks of ink occurring during the printing process then it is time to manually clean the print head (see maintenance).