2,516
edits
Changes
Jump to navigation
Jump to search
Line 51:
Line 51: + + − {{#evu:https://www.youtube.com/watch?v=0cCH_b2FtTE}}+ + + − ==Documentation==+ + − ====Terminology====+ − − * Rip - Cuts made along the length of the wood. − * Cross-cut - Cuts made across the grain along the shorter side of the wood. − * Push stick - A piece of wood or plastic used to push the wood being cut through the blade while keeping fingers away from the blade. − * Fence - A guide for measuring the cut and guiding the wood. − * Riving Knife - A flat metal device that mounts behind the saw blade. This device prevents material from closing up on the blade and causing a dangerous condition called a material kickback. − * Sled - A fixture that is placed on top of the table to assist with cross cuts. The sled keeps material perpendicular to the blade and helps to prevent the blade from kicking back material. Line 90:
Line 88: − + − + Line 107:
Line 105: −
→Documentation
Here is an example of this piece of equipment being used.
Here is an example of this piece of equipment being used.
{{#evu:https://www.youtube.com/watch?v=0cCH_b2FtTE}}
{{#evu:https://www.youtube.com/watch?v=prZtjSlyLFo}}
{{#evu:https://www.youtube.com/watch?v=prZtjSlyLFo}}
==Documentation==
====Terminology====
* Punch - upper tool that is attached to the ram (the moving part of the press brake)
* Die - lower tool that sits on the bed of the press brake
[http://www.americanmachinetools.com/how_to_use_a_hand_brake.htm How to Use a Hand Brake]
[http://www.americanmachinetools.com/how_to_use_a_hand_brake.htm How to Use a Hand Brake]
[[Media:Quick Start Operation Manual - Titan 25T - DRAFT.pdf|CNC Press Brake User Manual]]
==Training==
==Training==
If a 90 degree input produces a 92degree bend select 'under bend 2 degrees'
If a 90 degree input produces a 92 degree bend select 'under bend 2 degrees'
If a 90 degree input produces a 88degree bend select 'over bend 2 degrees'
If a 90 degree input produces a 88 degree bend select 'over bend 2 degrees'
====Demonstration====
====Demonstration====
=== Bending Steps ===
=== Bending Steps ===
==Reset the Space==
==Reset the Space==