Changes

The Planer is used to trim wood boards down by precise measurements, never more than 1/16 of an inch on each pass. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The solid cast iron base, table and head are designed for production. The 2-speed oil bath gearbox transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM. The gearbox can be changed to 4-speed with the included gear to run lower speeds of 16 and 20 FPM. The corrugated infeed and fine groove outfeed rollers ensure a smooth feed. The precision ground and polished cast iron table rides on four steel columns giving it plenty of support for the larger workpiece. Heavy cast iron extension wings ensure a flat, smooth cut.

The Planer is used to trim wood boards down by precise measurements, never more than 1/16 of an inch on each pass. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The solid cast iron base, table and head are designed for production. The 2-speed oil bath gearbox transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM. The gearbox can be changed to 4-speed with the included gear to run lower speeds of 16 and 20 FPM. The corrugated infeed and fine groove outfeed rollers ensure a smooth feed. The precision ground and polished cast iron table rides on four steel columns giving it plenty of support for the larger workpiece. Heavy cast iron extension wings ensure a flat, smooth cut.

{{#evu:https://www.youtube.com/watch?v=NcGqyujNYlM}}

{{#evu:https://www.youtube.com/watch?v=NcGqyujNYlM}}

{{#evu:https://www.youtube.com/watch?v=oRK0yW4CcWs}}

{{#evu:https://www.youtube.com/watch?v=Aecl4v71Z4g}}

==Documentation==

==Documentation==

====General maintenance====

====General maintenance====

General and specific tasks need to take place to maintain machinery. Specific tasks are listed below '''''Note: In [Specific Maintenance Tasks below, 5th item has redundant terms "use if rusted", not sure how to edit table - CZ]'''''

General and specific tasks need to take place to maintain machinery. Specific tasks are listed below:

====Specific Maintenance Tasks====

====Specific Maintenance Tasks====