281
edits
Changes
Jump to navigation
Jump to search
Line 113:
Line 113: + + + + + + − Insert text+ + + + Line 125:
Line 134: − + − + − +
→Specific Maintenance Tasks
==Troubleshooting==
==Troubleshooting==
When dealing with miter saw issues, please have the wood shop aid or Justin assist you:
*Saw won’t start - Check power cord, outlet, and reset circuit breaker; ensure safety switch is fully engaged.
*Blade won’t cut straight - Verify miter and bevel settings are locked; check fence alignment and blade for warping.
*Excessive vibration - Inspect blade for damage or looseness; ensure arbor nut is tight; clean debris from blade area.
*Motor slows or stalls - Avoid forcing the cut; check for dull or dirty blade; confirm correct blade type for material.
==Maintenance==
==Maintenance==
====General maintenance====
====General maintenance====
*Clean saw after each use - remove sawdust from blade guard, table, and motor vents.
*Inspect and clean blade regularly - replace if dull, chipped, or warped.
*Lubricate moving parts lightly - avoid getting lubricant on cutting surfaces.
*Keep power cord and plug free from damage - replace immediately if worn or frayed.
====Specific Maintenance Tasks====
====Specific Maintenance Tasks====
!Done By
!Done By
|-
|-
|Sample
|Change Saw Blade
|Sample
|When Needed
|Sample
|Technician
|}
|}