281
edits
Changes
Jump to navigation
Jump to search
Line 4:
Line 4: + + + + + + Line 10:
Line 16: − + − |Has make=Miller+ − |Has model=Spectrum 875 − − + + + + + + + + + + + + + + + + Line 44:
Line 63: − + + Line 53:
Line 73: − + − + Line 64:
Line 84: − + Line 81:
Line 101: − − ==Safety== − # Only cut steel and aluminum. − # Never cut any coated materials − # Don't attempt to cut with the compressed air off − # Make sure the vent hood is on and placed near your working area. This will help evacuate the smoke. − # Arc rays can burn your eyes and skin. Wear a welding helmet and there should be no bare skin exposed. − # Never walk on the hoses or ground cable as this could cause damage to the machine. − # Never pull the trigger on the torch unless you are cutting material as this will reduce the life of the nozzle and electrode. + − + Line 110:
Line 122: − + − + − + − |}
→Specific Maintenance Tasks
|Is used in domain=
|Is used in domain=
|Has name={{PAGENAME}}
|Has name={{PAGENAME}}
|Has make=Miller
|Has model=Spectrum 875
|Has serial number=MJ324002P
|Has life expectancy=
|Has year of manufacture or purchase=
|Has replacement cost=
|Has icon=File:Plasma cutter.png
|Has icon=File:Plasma cutter.png
|Has icondesc=
|Has icondesc=
|Has imagedesc=
|Has imagedesc=
|Has description=
|Has description=
|Has certification=
|Has certification=https://georgefox.instructure.com/courses/1285
|Has ace=Needed;Makerhub@georgefox.edu
|Has ace=Jack Ellis;jellis18@georgefox.edu
}}
}}
[[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|100px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]
[[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|140px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]
[[{{#show: {{FULLPAGENAME}}|?Has image|link=none}}|300px|thumb|upright=1.5|{{#show: {{FULLPAGENAME}}|?Has imagedesc}}]]
[[{{#show: {{FULLPAGENAME}}|?Has image|link=none}}|300px|thumb|upright=1.5|{{#show: {{FULLPAGENAME}}|?Has imagedesc}}]]
Make: {{#show: {{PAGENAME}} |?Has make}}
Make: {{#show: {{PAGENAME}} |?Has make}}
Model: {{#show: {{PAGENAME}} |?Has model}}
Model: {{#show: {{PAGENAME}} |?Has model}}
Serial Number: {{#show: {{PAGENAME}} |?Has serial number}}
Ace: {{#show: {{PAGENAME}} |?Has ace.Has name}} ({{#show: {{PAGENAME}} |?Has ace.Has email address}}).
Ace: {{#show: {{PAGENAME}} |?Has ace.Has name}} ({{#show: {{PAGENAME}} |?Has ace.Has email address}}).
Location: {{#show: {{PAGENAME}} |?Is located in facility}}
Location: {{#show: {{PAGENAME}} |?Is located in facility}}
==Safety First==
[[File:Safety First HD2.png|left|150px]]
Here are some safety instructions for the {{PAGENAME}}. Remember... SAFETY FIRST!!!
* Only cut steel and aluminum.
* Never cut any coated materials
* Don't attempt to cut with the compressed air off
* Make sure the vent hood is on and placed near your working area. This will help evacuate the smoke.
* Arc rays can burn your eyes and skin. Wear a welding helmet and there should be no bare skin exposed.
* Never walk on the hoses or ground cable as this could cause damage to the machine.
* Never pull the trigger on the torch unless you are cutting material as this will reduce the life of the nozzle and electrode.
==Description==
==Description==
*Gouge- To remove material without cutting all the way through.
*Gouge- To remove material without cutting all the way through.
*Trigger Safety Lock- When operating the start trigger on the plasma torch you will need to flip back the safety lock back before pulling the trigger.
*Trigger Safety Lock- When operating the start trigger on the plasma torch you will need to flip back the safety lock back before pulling the trigger.
[https://www.millerwelds.com/files/owners-manuals/o242880c_mil.pdf User Manual]
[[Media:O242880c mil.pdf|Plasma Cutter User Manual]]
==Training==
==Training==
[[File:Plasma Control.JPG|none|thumb|600x600px]]
[[File:Plasma Control.JPG|none|thumb|600x600px]]
Material Settings:
'''Material Settings:'''
[[File:Plasma Cutting Settings.JPG |none|thumb|600x600px]]
[[File:Plasma Cutting Settings.JPG |none|thumb|600x600px]]
Shield Settings:
'''Shield Settings:'''
[[File:Shield_Settings.JPG |none|thumb|600x600px]]
[[File:Shield_Settings.JPG |none|thumb|600x600px]]
====General Procedure====
====General Procedure====
# Place the fume hood over the area you will be welding.
# Place the fume hood over the area you will be welding to help remove fumes.
# Make sure power and the compressed air line is connected.
# Make sure power and the compressed air line is connected.
# Attach the ground clamp to the fixed work piece. The surface should be clean and paint free for a good connection. Keep the clamp close to the cut but out of the way.
# Attach the ground clamp to the fixed work piece. The surface should be clean and paint free for a good connection. Keep the clamp close to the cut but out of the way.
# Disconnect the ground clamp.
# Disconnect the ground clamp.
# Reset the space!
# Reset the space!
==Certification==
==Certification==
Complete the <strong>Welding Shop - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
[https://foxtale.georgefox.edu/moodle/course/view.php?id=31367#section-0 Foxtale Course]
[https://georgefox.instructure.com/enroll/R6RF69 Maker Hub Canvas Course]
==Troubleshooting==
==Troubleshooting==
!Done By
!Done By
|-
|-
|Sample
|N/A
|Sample
|N/A
|Sample
|N/A