Changes

604 bytes added , 4 months ago

Line 92: Line 92:

==Troubleshooting==

+

*Material slipping - Tighten the top roller adjustment or use a roller set that matches the material profile.

+

*Uneven bend - Ensure material is fed straight and apply consistent pressure throughout the bend.

+

*Material kinks - Reduce roller gap increments and make multiple passes instead of one heavy pass.

+

*Difficulty turning crank - Check for roller lubrication and remove any debris or burrs from rollers.

+

*Roller wear or damage - Inspect for flat spots or cracks; replace rollers if necessary.

+

*Inconsistent ring size - Verify roller settings remain unchanged during bending and measure frequently.

==Maintenance==

281

edits

Ring Roller (view source)