Changes

==Troubleshooting==

==Troubleshooting==

*Material slipping – Tighten the top roller adjustment or use a roller set that matches the material profile.

*Material slipping - Tighten the top roller adjustment or use a roller set that matches the material profile.

*Uneven bend – Ensure material is fed straight and apply consistent pressure throughout the bend.

*Uneven bend - Ensure material is fed straight and apply consistent pressure throughout the bend.

*Material kinks – Reduce roller gap increments and make multiple passes instead of one heavy pass.

*Material kinks - Reduce roller gap increments and make multiple passes instead of one heavy pass.

*Difficulty turning crank – Check for roller lubrication and remove any debris or burrs from rollers.

*Difficulty turning crank - Check for roller lubrication and remove any debris or burrs from rollers.

*Roller wear or damage – Inspect for flat spots or cracks; replace rollers if necessary.

*Roller wear or damage - Inspect for flat spots or cracks; replace rollers if necessary.

*Inconsistent ring size – Verify roller settings remain unchanged during bending and measure frequently.

*Inconsistent ring size - Verify roller settings remain unchanged during bending and measure frequently.

==Maintenance==

==Maintenance==