2,657
edits
Changes
Jump to navigation
Jump to search
Line 17:
Line 17: − + Line 117:
Line 117: − + − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
→Certification
|Has description=
|Has description=
|Has certification=https://georgefox.instructure.com/courses/1308
|Has certification=https://georgefox.instructure.com/courses/1308
|Has ace=Klayton Rhoads;krhoads16@georgefox.edu
|Has ace=Needed;Makerhub@georgefox.edu
}}
}}
The scanners are very fragile. Take care to prevent damage by dropping. Never pull on the scanner cords as the connectors could be easily damaged. Keep your fingers off of the optical lens as the grease from your fingers can cause issues.
The scanners are very fragile. Take care to prevent damage by dropping. Never pull on the scanner cords as the connectors could be easily damaged. Keep your fingers off of the optical lens as the grease from your fingers can cause issues.
==Certification==
==Canvas Certification==
Complete <strong>The Vault - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
Complete <strong>The Vault - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
[https://georgefox.instructure.com/enroll/GH36RT Maker Hub Canvas Course]
[https://georgefox.instructure.com/enroll/JFA784 Maker Hub Canvas Course]
==Troubleshooting==
==Troubleshooting==
Artec Spider
#Connection & Power
##Check USB cable is securely connected to both scanner and computer.
##Confirm the blue LED on the scanner is lit.
##Try a different USB port (preferably USB 3.0) and avoid hubs.
#Software Setup
##Ensure Artec Studio is updated to the latest version.
##Select the Spider in the device list before starting a scan.
#Calibration & Warm-Up
##Let the Spider warm up for 10–15 minutes before scanning—its structured light projector is sensitive to temperature.
##Perform a calibration using the supplied calibration panel if scans show distortion or misalignment.
#Scanning Conditions
##Keep the scanner 20–30 cm from the object for optimal resolution.
##Maintain smooth, steady movement—avoid jerky panning.
#Tracking Issues
##Add tracking markers or place the object on a textured background if tracking is lost.
##Reduce object or turntable movement during scanning.
Artec Eva
#Connection & Power
##Verify USB 3.0 cable is fully seated—Eva draws more power than Spider.
##Check for the green LED on the scanner head.
#Software Setup
##Update Artec Studio to the latest version.
##Select Eva from the scanner list in the software.
#Calibration
##Eva does not require frequent warm-up, but recalibrate if geometry appears distorted.
#Scanning Conditions
##Maintain 40–100 cm distance from the object.
##Ensure good, even lighting; avoid strong shadows or direct sunlight.
#Tracking Stability
##Scan with a background that has texture; plain walls or empty tables can cause tracking loss.
##Use larger sweeps to capture big surfaces and avoid sudden movements.
#Performance & Data Handling
##Close other software to give more resources to Artec Studio.
##Save large scans frequently to avoid data loss.
##If lag occurs, reduce capture resolution or scan sections separately and align later.
==Maintenance==
==Maintenance==