Changes

##Turn OFF the machine, remove the honeycomb table, and plug in the rotary tool. The rest of the laser cutter setup is the same as above.

##Turn OFF the machine, remove the honeycomb table, and plug in the rotary tool. The rest of the laser cutter setup is the same as above.

##Continue As though you were cutting/engraving anything else until you hit the design tab. Hit the rotary button. It looks like a cylinder.  

##Continue As though you were cutting/engraving anything else until you hit the design tab. Hit the rotary button. It looks like a cylinder.  

##Enter the diameter of your bottle (using the Calipers in the lab), as it tells the Rotary Tool how fast to turn as it engraves. Do not mess this up, or you will have a stretched/squeezed image.    [[File:R1.png|thumb|600x600px|none]]

##Enter the diameter of your bottle (using the Calipers in the lab), as it tells the Rotary Tool how fast to turn as it engraves. Do not mess this up, or you will have a stretched/squeezed image.    [[File:R2.png|thumb|600x600px|none]]

##Once you click OK/apply, the window background will look like the image below.

##Once you click OK/apply, the window background will look like the image below.

##Double click/drag the job onto the window. It should automatically flip the image so that it will engrave in the proper orientation even though the bottle is held horizontally.  [[File:R2.png|thumb|600x600px|none]]

##Double click/drag the job onto the window. It should automatically flip the image so that it will engrave in the proper orientation even though the bottle is held horizontally.  [[File:R2.png|thumb|600x600px|none]]