232
edits
Changes
Jump to navigation
Jump to search
Line 103:
Line 103: + + + + +
→Troubleshooting
==Troubleshooting==
==Troubleshooting==
*Uneven bend along length - Check that the workpiece is seated evenly and the clamping bar is parallel to the bed. Adjust clamping pressure if needed.
*Material slipping during bend - Increase clamping pressure and ensure the clamping surfaces are clean and free of oil or debris.
*Bend angle inconsistent - Verify that the bending leaf pivots smoothly without binding; lubricate pivot points as required.
*Difficulty moving bending handle - Inspect for mechanical obstructions, dry pivot joints, or exceeding the brake’s rated capacity.
*Material cracking at bend - Use material within thickness limits and consider increasing bend radius for brittle metals.
==Maintenance==
==Maintenance==