278
edits
Changes
Jump to navigation
Jump to search
Line 83:
Line 83: − Insert general procedure here.+
→General Procedure
====General Procedure====
====General Procedure====
The Janome MyLock 634D is a multi-thread serger designed for overlocking, trimming, and finishing fabric edges in one step. To operate, start by threading the machine in the correct sequence (upper looper, lower looper, right needle, left needle), following the color-coded guides. Select the desired stitch type and adjust tension dials, stitch length, and differential feed settings based on fabric type. Place fabric under the presser foot, lower the foot lever, and gently guide the material while the machine trims and serges the edge. For best results, maintain a consistent feed and avoid pulling the fabric. Always test on a scrap piece before sewing the final garment.
==Certification==
==Certification==