1,965
edits
Changes
Jump to navigation
Jump to search
Line 23:
Line 23: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
→Documentation
== Documentation ==
== Documentation ==
Setting up Simulator
Plug in extension cord (make sure it won’t trip anyone)
Flip switch on back of machine
Press power button on the front of the machine
Attach welding process of your choice (see welding processes section down below)
At login screen, select user
Select right or left handed
Open Exercise
Place Helmet on head and size to head
Clean up
Take helmet off at place on 2nd shelf of cart
Disconnect welding process
Exit out of the exercise
Press power button on front of the machine, and wait for screen to be completely blank
Flip the switch to off on the back of machine
Unplug the extension cord and leave it coiled up neatly underneath the cart
Stack work pieces neatly
Coil up all torches used and neatly place on the bottom shelf of the cart
Switching Welding Processes
MIG
Take connector of MIG torch and align 4 holes with machine (left side)
Twist the threaded end, but do not over tighten
Stick
Grab clamp with small cord attached
Line up the 5 holes of the connector with that of the machine (right side)
To remove, press silver button and softly pull straight out (do not twist)
TIG
Grab cable with TIG torch attached
Align 4 holes of the connector with that of the machine (left side - same as MIG)
Screw in while holding the connector (do not over tighten)
To remove, unscrew the connector
Warnings
Don’t drop the helmet, always place on cart when your not wearing it
When someone enters the tool room, make sure they know about the extension cord
Do not aggressively over tighten the connectors of the welding torches
Make sure to press silver button when releasing the connector of the stick torch
Do not cut power to the machine before it is completely shut down (clean up #4 & #5)
Always lay torches completely on top of the table
Make sure overhead clamp is secured tightly before using
Simulator Video:
https://www.millerwelds.com/equipment/training-solutions/training-equipment/augmentedarc-augmented-reality-welding-system-m30100
== Training ==
== Training ==