134
edits
Changes
Jump to navigation
Jump to search
Line 16:
Line 16: − + + + Line 57:
Line 59: − Insert Text+ + + + + + + + + + + + + + + + + + + + + Line 64:
Line 86: + + + + + + − #Ensure that your sheet metal is thinner or equivalent to 16-gauge sheet metal, and ensure that it is less than 48" in width.+ − #If making a bend for a box or a pan, adjust the fingers so that the equivalent width of the fingers is just shorter than your sheet metal. − #Adjust the clamping force and the clamping handle to allow room to insert your work piece. − #Insert your work piece to the line you want to bend, centered in the brake, and clamp your piece securely. − #Pull up on the bending handle of the leaf slowly until your piece is bent to the desired angle, and slowly lower the leaf. − #If the piece does not bend straight, unclamp the handle on the over-bent side and adjust the top leaf. − #Adjust the clamp handle, and remove your piece. − #Put back any fingers if adjusted, and deburr if any rough edges are left. Line 87:
Line 108: − + − − ==Troubleshooting==
→Certification
|Has icondesc=
|Has icondesc=
|Has certification=
|Has certification=
|Has image=File:
|Has image=File:CNC.png
|Has imagedesc=
|Has imagedesc=
|Has description=
|Has description=
|Has ace=Needed;Makerhub@georgefox.edu
|Has ace=Needed;Makerhub@georgefox.edu
}}
}}
[[File:CNC.png|right|300px]]
Make: Langmuir
Make: Langmuir
====Operation====
====Operation====
To opperate the CNC Press Break Under the 'Create Bend' tab, select 'new bend'.
Then select the proper Punch (Standard 35 *) and Die (4-way w/risers).
Then select the material that you will be bending and the proper angle that you want.
Then add material thickness and bend width
Under the 'run' Tab select new and create a name for the job.
Select the add bend button on the bottom right of the screen, make sure all settings are correct.
Press the green run button on the bottom left
Press BOTH green buttons on the machine to move the punch down to the safety clearance area.
Enter your material into the machine
press the foot pedal twice to bend the material. (do multiple times if multiple bends on the same job)
==Over/Under bending==
If you set the machine to a 90 degree bend and it executes a 92 degree bend, this is called an overbend. The machine is able to account for this. If you happen to have an over/under bend select the OPPOSITE bend and input the amount of the over/under bend.
If a 90 degree input produces a 92degree bend select 'under bend 2 degrees'
If a 90 degree input produces a 88degree bend select 'over bend 2 degrees'
====Demonstration====
====Demonstration====
====General Procedure====
====General Procedure====
After the bend is properly set up in the computer, press the two green buttons simultaneously. This should lower the punch to the safety clearance zone.
Once in this zone insert your material into the machine where you want the bend to be and hold with two hands.
Press the foot pedal twice and be careful not to let the metal hit you while its bending.
=== Bending Steps ===
=== Bending Steps ===
==Reset the Space==
==Reset the Space==
Complete the <strong>Machine Shop - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
Complete the <strong>Machine Shop - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
[https://georgefox.instructure.com/enroll/GH36RT Maker Hub Canvas Course]
[https://georgefox.instructure.com/enroll/R6RF69 Maker Hub Canvas Course]
==Maintenance==
==Maintenance==