98
edits
Changes
Jump to navigation
Jump to search
Line 57:
Line 57: − Insert Text+ + + + + + + + + + + +
no edit summary
====Operation====
====Operation====
To opperate the CNC Press Break Under the 'Create Bend' tab, select 'new bend'.
Then select the proper Punch (Standard 35 *) and Die (4-way w/risers).
Then select the material that you will be bending and the proper angle that you want.
Then add material thickness and bend width
Under the 'run' Tab select new and create a name for the job.
Select the add bend button on the bottom right of the screen, make sure all settings are correct.
Press the green run button on the bottom left
Press BOTH green buttons on the machine to move the punch down to the safety clearance area.
Enter your material into the machine
press the foot pedal twice to bend the material. (do multiple times if multiple bends on the same job)
====Demonstration====
====Demonstration====