134
edits
Changes
Jump to navigation
Jump to search
Line 73:
Line 73: − + − ex. + − + − + + + + Line 83:
Line 86: + + + + + + Line 99:
Line 108: − + −
→Certification
==Over/Under bending==
==Over/Under bending==
If you set the machine to a 90degree bend and it executes a 92 degree bend, this is called an overbend. The machine is able to account for this. If you happen to have an over/under bend select the OPPOSITE bend and input the amount of the over/under bend.
If you set the machine to a 90 degree bend and it executes a 92 degree bend, this is called an overbend. The machine is able to account for this. If you happen to have an over/under bend select the OPPOSITE bend and input the amount of the over/under bend.
If a 90degree input produces a 92degree bend select 'under bend 2degrees'
If a 90degree input produces a 88degree bend select 'over bend 2degrees'
If a 90 degree input produces a 92degree bend select 'under bend 2 degrees'
If a 90 degree input produces a 88degree bend select 'over bend 2 degrees'
====Demonstration====
====Demonstration====
====General Procedure====
====General Procedure====
After the bend is properly set up in the computer, press the two green buttons simultaneously. This should lower the punch to the safety clearance zone.
Once in this zone insert your material into the machine where you want the bend to be and hold with two hands.
Press the foot pedal twice and be careful not to let the metal hit you while its bending.
=== Bending Steps ===
=== Bending Steps ===
Complete the <strong>Machine Shop - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
Complete the <strong>Machine Shop - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
[https://georgefox.instructure.com/enroll/GH36RT Maker Hub Canvas Course]
[https://georgefox.instructure.com/enroll/R6RF69 Maker Hub Canvas Course]
==Maintenance==
==Maintenance==