2,657
edits
Changes
Jump to navigation
Jump to search
Line 97:
Line 97: − + − + + + + + +
→Certification
==Certification==
==Canvas Certification==
Complete the <strong>Machine Shop - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
Complete the <strong>Machine Shop - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
[https://georgefox.instructure.com/enroll/R6RF69 Maker Hub Canvas Course]
[https://georgefox.instructure.com/enroll/JFA784 Maker Hub Canvas Course]
==Troubleshooting==
==Troubleshooting==
*Uneven bend along length - Check that the workpiece is seated evenly and the clamping bar is parallel to the bed. Adjust clamping pressure if needed.
*Material slipping during bend - Increase clamping pressure and ensure the clamping surfaces are clean and free of oil or debris.
*Bend angle inconsistent - Verify that the bending leaf pivots smoothly without binding; lubricate pivot points as required.
*Difficulty moving bending handle - Inspect for mechanical obstructions, dry pivot joints, or exceeding the brake’s rated capacity.
*Material cracking at bend - Use material within thickness limits and consider increasing bend radius for brittle metals.
==Maintenance==
==Maintenance==