142
edits
Changes
Jump to navigation
Jump to search
Line 53:
Line 53: − + − + + Line 61:
Line 62: − +
→Using the Bath
*****Replace the basket and lid.
*****Replace the basket and lid.
**'''What to do if the bath is beeping:'''
**'''What to do if the bath is beeping:'''
***This means the bath is low on water (below 1.5 horizontal holes of the basket inside)
***This typically means the bath is low on water (below 1.5 horizontal holes of the basket inside)
***Take the clear bucket under the sink and use it to fill the bath until the fluid level inside is only 1.5 horizontal basket holes from the top
***Take the clear bucket under the sink and use it to fill the bath until the fluid level inside is only 1.5 horizontal basket holes from the top
**Tell Ben, Gabi, or Justin if you think the solution should be switched, do not do it yourself
***Tell the Bath Ace if you think the solution should be switched, do not do it yourself
***The bath may be sending out an error message in which case the Instruction Manual should be consulted.
**'''What to do if the bath appears to be leaking:'''
**'''What to do if the bath appears to be leaking:'''
***Immediately inform the Aces of the Lab and/or Justin
***Immediately inform the Aces of the Lab and/or Justin
**'''What to do in the event of a spill:'''
**'''What to do in the event of a spill:'''
***Evacuate the lab and shut it down until the spill has been properly cleaned
***Evacuate the lab and shut it down until the spill has been properly cleaned
***Immediately inform the Aces of the Lab and/or Justin; if unavailable and the spill is large then contact Security
***Immediately inform the Aces of the Lab; if unavailable and the spill is large then contact Security
***Use the spill kit
***Use the spill kit
****There should be instructions inside
****There should be instructions inside