Changes

3D Scanners (view source)

16 bytes removed , 3 months ago

Line 128: Line 128:

#Connection & Power

−

##Check USB cable is securely connected to both scanner and computer.

−

##Confirm the blue LED on the scanner is lit.

−

##Try a different USB port (preferably USB 3.0) and avoid hubs.

−

#Software Setup

−

##Ensure Artec Studio is updated to the latest version.

−

##Select the Spider in the device list before starting a scan.

−

#Calibration & Warm-Up

−

##Let the Spider warm up for 10–15 minutes before scanning—its structured light projector is sensitive to temperature.

−

##Perform a calibration using the supplied calibration panel if scans show distortion or misalignment.

−

#Scanning Conditions

−

##Ensure the object is matte—apply 3D scanning spray if it’s shiny or transparent.

−

##Keep the scanner 20–30 cm from the object for optimal resolution.

−

##Maintain smooth, steady movement—avoid jerky panning.

−

#Tracking Issues

−

##Add tracking markers or place the object on a textured background if tracking is lost.

−

##Reduce object or turntable movement during scanning.

281

edits