214
edits
Changes
Jump to navigation
Jump to search
Line 129:
Line 129: − *Check USB cable is securely connected to both scanner and computer.+ − *Confirm the blue LED on the scanner is lit.+ − *Try a different USB port (preferably USB 3.0) and avoid hubs.+ − *Ensure Artec Studio is updated to the latest version.+ − *Select the Spider in the device list before starting a scan.+ − *Let the Spider warm up for 10–15 minutes before scanning—its structured light projector is sensitive to temperature.+ − *Perform a calibration using the supplied calibration panel if scans show distortion or misalignment.+ − *Ensure the object is matte—apply 3D scanning spray if it’s shiny or transparent.+ − *Keep the scanner 20–30 cm from the object for optimal resolution.+ − *Maintain smooth, steady movement—avoid jerky panning.+ − *Add tracking markers or place the object on a textured background if tracking is lost.+ − *Reduce object or turntable movement during scanning.+
→Troubleshooting
#Connection & Power
#Connection & Power
##Check USB cable is securely connected to both scanner and computer.
##Confirm the blue LED on the scanner is lit.
##Try a different USB port (preferably USB 3.0) and avoid hubs.
#Software Setup
#Software Setup
##Ensure Artec Studio is updated to the latest version.
##Select the Spider in the device list before starting a scan.
#Calibration & Warm-Up
#Calibration & Warm-Up
##Let the Spider warm up for 10–15 minutes before scanning—its structured light projector is sensitive to temperature.
##Perform a calibration using the supplied calibration panel if scans show distortion or misalignment.
#Scanning Conditions
#Scanning Conditions
##Ensure the object is matte—apply 3D scanning spray if it’s shiny or transparent.
##Keep the scanner 20–30 cm from the object for optimal resolution.
##Maintain smooth, steady movement—avoid jerky panning.
#Tracking Issues
#Tracking Issues
##Add tracking markers or place the object on a textured background if tracking is lost.
##Reduce object or turntable movement during scanning.
==Maintenance==
==Maintenance==