281
edits
Changes
Jump to navigation
Jump to search
Line 123:
Line 123: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
→Troubleshooting
==Troubleshooting==
==Troubleshooting==
Artec Spider – Troubleshooting Checklist
(High-precision, small-object scanner)
#Connection & Power
*Check USB cable is securely connected to both scanner and computer.
*Confirm the blue LED on the scanner is lit.
*Try a different USB port (preferably USB 3.0) and avoid hubs.
#Software Setup
*Ensure Artec Studio is updated to the latest version.
*Select the Spider in the device list before starting a scan.
#Calibration & Warm-Up
*Let the Spider warm up for 10–15 minutes before scanning—its structured light projector is sensitive to temperature.
*Perform a calibration using the supplied calibration panel if scans show distortion or misalignment.
#Scanning Conditions
*Ensure the object is matte—apply 3D scanning spray if it’s shiny or transparent.
*Keep the scanner 20–30 cm from the object for optimal resolution.
*Maintain smooth, steady movement—avoid jerky panning.
#Tracking Issues
*Add tracking markers or place the object on a textured background if tracking is lost.
*Reduce object or turntable movement during scanning.
==Maintenance==
==Maintenance==