231
edits
Changes
Jump to navigation
Jump to search
Line 128:
Line 128: − − − − − − − − − − − − − − − −
→Troubleshooting
#Connection & Power
#Connection & Power
##Check USB cable is securely connected to both scanner and computer.
##Check USB cable is securely connected to both scanner and computer.
##Confirm the blue LED on the scanner is lit.
##Confirm the blue LED on the scanner is lit.
##Try a different USB port (preferably USB 3.0) and avoid hubs.
##Try a different USB port (preferably USB 3.0) and avoid hubs.
#Software Setup
#Software Setup
##Ensure Artec Studio is updated to the latest version.
##Ensure Artec Studio is updated to the latest version.
##Select the Spider in the device list before starting a scan.
##Select the Spider in the device list before starting a scan.
#Calibration & Warm-Up
#Calibration & Warm-Up
##Let the Spider warm up for 10–15 minutes before scanning—its structured light projector is sensitive to temperature.
##Let the Spider warm up for 10–15 minutes before scanning—its structured light projector is sensitive to temperature.
##Perform a calibration using the supplied calibration panel if scans show distortion or misalignment.
##Perform a calibration using the supplied calibration panel if scans show distortion or misalignment.
#Scanning Conditions
#Scanning Conditions
##Ensure the object is matte—apply 3D scanning spray if it’s shiny or transparent.
##Ensure the object is matte—apply 3D scanning spray if it’s shiny or transparent.
##Keep the scanner 20–30 cm from the object for optimal resolution.
##Keep the scanner 20–30 cm from the object for optimal resolution.
##Maintain smooth, steady movement—avoid jerky panning.
##Maintain smooth, steady movement—avoid jerky panning.
#Tracking Issues
#Tracking Issues
##Add tracking markers or place the object on a textured background if tracking is lost.
##Add tracking markers or place the object on a textured background if tracking is lost.
##Reduce object or turntable movement during scanning.
##Reduce object or turntable movement during scanning.