Page history
24 August 2026
15 July 2025
13 May 2025
17 January 2025
12 November 2024
22 August 2024
28 February 2024
21 February 2024
26 August 2023
21 February 2023
23 January 2023
30 September 2022
29 September 2022
12 February 2022
31 January 2022
28 January 2022
→Specific Maintenance Tasks: Added last time maintenance was performed, removed cleaning with isopropyl as this is no longer considered best practice
-48
→General Procedure: Removed old info and added additional tips
-82
→Terminology: Added link to gerber export guide
+69
→Before you Print: Minor language edits
m+12
Changed drill bit image size
→Before you Print: Moved image, added caption
+16
Header/image alignment
m-92
27 January 2022
→Before you Print: Added picture of available drill bits
+53
→Terminology: Updated link from sunstone to JLC
-17
→General Procedure: Modified instructions on cleaning sensors to reflect current best practice of not using isopropyl, instead cleaning with dry q-tip when paste is still wet.
-346
Added "Before you print" section for final checks and best practices
+838
→Documentation: Added link to circuit design guidelines
+82
22 July 2021
24 February 2021
1 February 2021
→Specific Maintenance Tasks: Added items for replacing ink/paste and re-labeling dispenser
+163
→Terminology: Removed copy-pasted section from reflow page. Removed lot names from ink descriptions as these change frequently. Added section describing lot names.
-67
→Operation: Cleaned up wording
m+72