232
edits
Changes
Jump to navigation
Jump to search
Line 55:
Line 55: + + Line 65:
Line 67: − + Line 94:
Line 96: − +
→Terminology
====Terminology====
====Terminology====
Platen - A stationary, full cast-iron or aluminum support behind the belt that provides a flat surface for even sanding pressure and helps prevent belt deflection.
[[Media:0460267_man_EN.pdf|Belt/Disc Sander User Manual]]
[[Media:0460267_man_EN.pdf|Belt/Disc Sander User Manual]]
====Demonstration====
====Demonstration====
You will need to demonstrate the safe setup and use of the belt/disc sander. You will be sketching an arc onto a piece of scrap material and sanding up to the line using the disc and belt. Make sure to keep the material moving to prevent burning and tearing of the sanding belt/disc. To save yourself some time now and in the future it might be good to pick up an endorsement for the vertical wood bandsaw.
You will need to demonstrate the safe setup and use of the belt/disc sander. You will be sketching an arc onto a piece of scrap material and sanding up to the line using the disc and belt. Make sure to keep the material moving to prevent burning and tearing of the sanding belt/disc. To save yourself some time now and in the future, it might be good to pick up an endorsement for the vertical wood bandsaw. If you do so, then you can use the bandsaw to rough cut your arc before taking it to the sander.
====General Procedure====
====General Procedure====
Complete the <strong>Wood Shop - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
Complete the <strong>Wood Shop - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.
[https://georgefox.instructure.com/enroll/G7CTPX Maker Hub Canvas Course]
[https://georgefox.instructure.com/enroll/R6RF69 Maker Hub Canvas Course]
==Troubleshooting==
==Troubleshooting==