press the foot pedal twice to bend the material. (do multiple times if multiple bends on the same job)
press the foot pedal twice to bend the material. (do multiple times if multiple bends on the same job)
+
+
==Over/Under bending==
+
If you set the machine to a 90degree bend and it executes a 92 degree bend, this is called an overbend. The machine is able to account for this. If you happen to have an over/under bend select the OPPOSITE bend and input the amount of the over/under bend.
+
ex.
+
If a 90degree input produces a 92degree bend select 'under bend 2degrees'
+
If a 90degree input produces a 88degree bend select 'over bend 2degrees'