232
edits
Changes
Jump to navigation
Jump to search
Line 103:
Line 103: − *Uneven bend along length - Check that the workpiece is seated evenly and the clamping bar is parallel to the bed. Adjust clamping pressure if needed. − *Material slipping during bend - Increase clamping pressure and ensure the clamping surfaces are clean and free of oil or debris. − *Bend angle inconsistent - Verify that the bending leaf pivots smoothly without binding; lubricate pivot points as required. − *Difficulty moving bending handle - Inspect for mechanical obstructions, dry pivot joints, or exceeding the brake’s rated capacity. − *Material cracking at bend - Use material within thickness limits and consider increasing bend radius for brittle metals.
→Troubleshooting
==Troubleshooting==
==Troubleshooting==
==Maintenance==
==Maintenance==