Changes

Please refer to the manual to learn the anatomy of the machine.  

Please refer to the manual to learn the anatomy of the machine.  

·       Question regarding the thread controller spring, because they’ll need to make that adjustment themselves and should know what it is, where it is, and how to do that.

*Question regarding the thread controller spring, because they’ll need to make that adjustment themselves and should know what it is, where it is, and how to do that.

·       Make sure the bobbin case is empty before trying to fill another bobbin. If there is a bobbin left in the bobbin case when winding a new bobbin a thread jam will occur in the bobbin case. Congratulations! You just broke it!

*Make sure the bobbin case is empty before trying to fill another bobbin. If there is a bobbin left in the bobbin case when winding a new bobbin a thread jam will occur in the bobbin case. Congratulations! You just broke it!

RE: Changing the needle

RE: Changing the needle

RE: Demo and instructions for it, (These things need to included.)

RE: Demo and instructions for it, (These things need to included.)

·       Following the safety protocol.

*Following the safety protocol.

·       Threading the machine

*Threading the machine

·       Filling the bobbin, because people are going to need thread to match their project.

*Filling the bobbin, because people are going to need thread to match their project.

·       We need a demo project or projects to choose from. Leather or upholstery?

*We need a demo project or projects to choose from. Leather or upholstery?

·       They should have to prove they can remove and replace the needle. This is where they need to know what the scarf is and which direction it should face.

*They should have to prove they can remove and replace the needle. This is where they need to know what the scarf is and which direction it should face.

·       Double checking the stitch speed and stitch length, and that they know how to change those settings.

*Double checking the stitch speed and stitch length, and that they know how to change those settings.

·       Adjusting thread controller spring is simple and should be known and demonstrated since its function is dependent on the materials being used.

*Adjusting thread controller spring is simple and should be known and demonstrated since its function is dependent on the materials being used.

·       In the instruction for the demo students should be encouraged to do test samples before stitching on their actual project.

*In the instruction for the demo students should be encouraged to do test samples before stitching on their actual project.

·       I think for the most inexperienced it would be helpful to remind them ‘righty-tight/lefty-loosey re: the tension knob.

*I think for the most inexperienced it would be helpful to remind them ‘righty-tight/lefty-loosey re: the tension knob.

·       Stitch length dial works differently than the instruction book says; there is no stopper.

*Stitch length dial works differently than the instruction book says; there is no stopper.

·       Part of reformatting the uploaded/downloaded instruction manual should be marking which adjustments listed in the contents should only be performed by the tech. (Or maybe those parts of the manual shouldn’t be on the WIKI at all, in order to avoid confusion.)

*Part of reformatting the uploaded/downloaded instruction manual should be marking which adjustments listed in the contents should only be performed by the tech. (Or maybe those parts of the manual shouldn’t be on the WIKI at all, in order to avoid confusion.)

General remarks:

General remarks:

Let me know if you'd like me to find any other instructional materials.

Let me know if you'd like me to find any other instructional materials.

Here is an example of this piece of equipment being used.

Here is an example of this piece of equipment being used.