Changes

Ring Roller (view source)

616 bytes added , 2 months ago

Line 92: Line 92:

==Troubleshooting==

+

*Material slipping – Tighten the top roller adjustment or use a roller set that matches the material profile.

+

*Uneven bend – Ensure material is fed straight and apply consistent pressure throughout the bend.

+

*Material kinks – Reduce roller gap increments and make multiple passes instead of one heavy pass.

+

*Difficulty turning crank – Check for roller lubrication and remove any debris or burrs from rollers.

+

*Roller wear or damage – Inspect for flat spots or cracks; replace rollers if necessary.

+

*Inconsistent ring size – Verify roller settings remain unchanged during bending and measure frequently.

==Maintenance==

281

edits