281
edits
Changes
Jump to navigation
Jump to search
Line 91:
Line 91: + + + + + + + + + + + + + + + + +
→Troubleshooting
==Troubleshooting==
==Troubleshooting==
*No weld or weak weld:
**Check electrode tips for wear, dirt, or oxidation; clean or replace as needed.
**Verify proper electrode pressure; adjust using the adjustment knob/screw.
**Ensure cables are securely connected and not damaged.
*Sparks at handles / arcing:
**Inspect insulation on handles and tongs; replace if cracked or damaged.
**Confirm all connections are tight and corrosion-free.
*Tongs won’t open/close smoothly:
**Check spring mechanism for damage or debris; clean and lubricate lightly if needed.
**Ensure pivot points are not seized or misaligned.
*Overheating tongs:
**Reduce duty cycle; allow tongs to cool between welds.
**Check for proper current settings and electrode contact.
*Uneven welds:
**Inspect electrode tips for uneven wear; dress or replace as needed.
**Confirm correct alignment of jaws and consistent pressure.
==Maintenance==
==Maintenance==