Changes

= Procedures: Blast stencil pattern on acrylic scrap =

= Procedures: Blast stencil pattern on acrylic scrap =

# Open the cabinet door.

# Open the cabinet door.

# Put the parts you wish to sandblast into the cabinet

# Place stencil/acrylic to sandblast into the cabinet

# After placing parts in the cabinet, make sure secure the door with latch properly

# After placing parts in the cabinet, make sure secure the door with latch properly

# Turn on the cabinet light and fan. Switches located…………….

# Turn on the cabinet light and fan. Switch is located on the top left of the machine

# Locate the power switch and turn on the sandblaster

# Locate the power switch and turn on the sandblaster

# Insert your arms into the gloves and position yourself to have a clear view into the cabinet

# Insert your arms into the gloves and position yourself to have a clear view into the cabinet

# Picking up the parts and gun, manually aim where you need to clean on the parts

# Picking up the parts and gun, manually aim where the stencil doesn't cover the acrylic

# Position your foot in the foot pedal mechanism. Once pedal is depressed sand will blast out of the gun

# Position your foot in the foot pedal mechanism. Once pedal is depressed sand will blast out of the gun

# When finished, turn the machine off

# When finished, turn the machine off