232
edits
Changes
Jump to navigation
Jump to search
Line 91:
Line 91: − *This setting determines how many supports are placed per unit area of your print's surface. + − **Higher density → more supports, stronger holding power, better for tall, heavy, or delicate parts, but harder post-processing.+ − **Lower density → fewer supports, easier cleanup, less resin use, but higher risk of part shifting or warping.+
→General Procedure
##Supports can be added, edited, and removed in the PreForm Supports tab.
##Supports can be added, edited, and removed in the PreForm Supports tab.
###Support density should be between .5 and .7.
###Support density should be between .5 and .7.
####This setting determines how many supports are placed per unit area of your print's surface.
#####Higher density → more supports, stronger holding power, better for tall, heavy, or delicate parts, but harder post-processing.
#####Lower density → fewer supports, easier cleanup, less resin use, but higher risk of part shifting or warping.
###Support point size should be between .6mm and .8mm.
###Support point size should be between .6mm and .8mm.
###These values can be edited if necessary to ensure printability, just use common sense when adjusting values.
###These values can be edited if necessary to ensure printability, just use common sense when adjusting values.